SANKO EPX-5K, it is specially formulated chemical anchor based on 100% pure epoxy resin, quick loading, no shrinking, and ideals for hot climate. The product can be stored even at temperatures above 30° C. SANKO EPX-5K has the strong bonding to the concrete and good performance in oversized holes. Application into wet concrete or diamond cored hole does not affect its performance.
APPLICATIONS:
• Generator foundation,
• Heavy duty machine,
• Jib crane,
• Automobile lift,
• Electrical power pole,
• Antenna tower,
• Floor slab connection,
• Wall and beam connections,
• Column connections,
• Structural repairing,
• Structural staircases,
• And etc.
USING THE CARTRIDGE:
1. Unscrew the cap and take out the plug.
2. Pull piston back and place cartridge into gun. Check the ejection of resin and hardener.
3. Screw on mixing nozzle. Do not use the first few centimeters of mixture (until the color of mixture change to be steady gray color).
INSTALLATION INSTRUCTIONS:
1. Drill the hole.
2. Thoroughly clean the hole to remove the dust by using a wire brush and a puffer.
3. Apply nozzle to the hole. Work from the bottom outwards until it fills approximately half of the hole.
4. Insert steel bar into the resin. Slowly rotate it by hand.
3. Screw on mixing nozzle. Do not use the first few centimeters of mixture (until the color of mixture change to be steady gray color).
