|
 |
|  DROP-IN
ANCHORS: CT>-TYPES.
SPECIAL FEATURES:
-
drop-in anchor will work
with bolts or threaded rods of any length.
-
Drill holes same length
as anchor for flush finish or deeper for more embedment into
concrete.
-
If anchor is no longer
needed, can fill with cement to make the surface smooth again.
|
|
Applications: |
- Hanging insulated boiler
pipe,
- Piping system,
- Blower,
- Heater,
- Conduit,
- And etc.
|
Installation Instruction:
[Move your mouse over the picture for DEMO]
  |
| Product
Code |
Body
Size
DxL |
Thread |
Drill
Bit
Size |
Min.
Emb. |
Pull-Out
Load: Kgf(kN) |
Setting
Tool |
| d |
l |
Initial |
Ultimate |
| Whitworth
Coarse Screw Threads: W |
| CT-2530 |
|
10x30 |
W5/16 |
14 |
10.0 |
30 |
|
950(9.3) |
1,100(10.7) |
HT-2530 |
| CT-3040 |
12x40 |
W3/8 |
15 |
12.0 |
40 |
1,000(9.8)
|
1,500(14.7)
|
HT-3040 |
| CT-4050 |
16x50 |
W1/2 |
20 |
16.0 |
50 |
1,900(18.6) |
2,500(24.5) |
HT-4050 |
| GT-3030 |
12x30 |
W3/8 |
12 |
12.0 |
30 |
950(9.3) |
1,300(12.7) |
HT-3030 |
| Unified
Coarse Screw Threads: UNC |
| CT-3040U |
|
12.7x40 |
U3/8 |
15 |
13(1/2") |
40 |
|
1,000(9.8) |
1,500(14.7) |
HT-3040 |
| CT-4050U |
16x50 |
U1/2 |
20 |
16.0(5/8") |
50 |
1,900(18.6) |
2,500(24.5) |
|
| Metric
Coarse Screw Threads: M |
| CT-830 |
|
10x30 |
M8 |
14 |
10 |
30 |
|
950(9.3) |
1,100(10.7) |
HT-2530 |
| CT-1040 |
12x40 |
M10 |
15 |
12 |
40 |
1,000(9.8) |
1,500(14.7) |
HT-3040 |
| CT-1250 |
16x50 |
M12 |
20 |
16 |
50 |
1,900(18.6) |
2,500(24.5) |
HT-4050 |
Concrete compressive strength (cube) 210 kgf/cm2
Min. Emb.: Minimum Embedment
|
|
|
 |
ฆ
